SRP-94MV Process Indicator for millivolt sensors

181.jpg

The SRP-94 meter is equipped with one voltage input 0-60 / 0-75 / 0-100 / 0-150mV. The selection of input range is realised by software, and selected range can be changed at anytime. The device operates in the following modes: linear, root, square and user defined (max. 20 points). Optionally SRP-94 with two relays outputs can be equipped with active current output. The 24V DC/100 mA output is used to power the measuring transducers. The RS-485 enables data transmission in production process monitoring systems. 2 or 4 relay (or OC) outputs make it possible to adjust the level of the measured signal. These outputs can be controlled according to one or two threshold values.

Product details

Accuracy
± 0,25% ± one digit in the entire operation range
Sensor Power Supply
24V DC +5%, -10% / max. 100 mA
Power Supply
19V - 50V DC, 16V - 35V AC, 85 - 260V AC/DC
Display
LED, red, 4 x 20 mm
Display Range
-999 - 9999 + decimal point
Input Types
0-60 mV, 0-75 mV, 0-100 mV, 0-150 mV
Output Types
0, 2 or 4 relays
Signal Re-transmission
operating range max. 0 - 24 mA
Case dimensions
96 x 48 x 100 mm
Communications Interface
RS-485, ModBus RTU
Product Downloads

+44 (0)1635 291 600

This email address is being protected from spambots. You need JavaScript enabled to view it.

 

An ISO 9001 Certified Company

SGS ISO 9001 UKAS 2014 TCL LR-1