SWL Seawater level transmitter - Marine Bronze housing


The SWL has been designed for use in continuous submersion in seawater, brackish and Saline media. The ceramic sensor installed internally has excellentcorrosion resistance which is ideal for even installations in stagnant, hot seawater. Housed within a Marine Bronze, PVDF or PVC housing, this submersible level transmitter is the ideal product where conventional submersible products do not last!

Every device is temperature compensated and calibrated and supplied with a traceable serial number and calibration certificate. The electronics incorporates a microprocessor based amplifier, this means there are no adjusting pots and therefore the electronics are very stable, especially in high vibration / shock applications.

Product details

Minimum level range
Maximum level range
Gauge, Sealed Gauge & Absolute
millivolt/4-wire, 4-20mA/2-wire, 0-10V/3-wire, 0.5 to 4.5V/3-wire ratiometric
Supply Voltage
3-12V dc/millivolt, 9-32V dc/2-wire, 14-32V dc/3-wire, 5V dc/ratiometric
Sensor Type
Ceramic Piezo-resistive
Process Connection
G1/4" male when nose cone removed
Electrical Connection
PVC, PUR, TPE or FEP vented cable with strain relief
IP Rating
IP68 Fully submersible
Cable sheath material
Diaphragm Material
Ceramic Al2O3 96 %
Process Connection Material
Marine Bronze (CA104)
Temperature Range
‐20°C to +60°C (non freezing)
Product Downloads

+44 (0)1635 291 600

This email address is being protected from spambots. You need JavaScript enabled to view it.


An ISO 9001 Certified Company

SGS ISO 9001 UKAS 2014 TCL LR-1