IWSL Water approved submersible level transmitter

622.jpg

The IWSL has been designed for use in continuous submersion in water. The submersible uses a piezo‐resistive media isolated silicon sensing technology and a stainless steel diaphragm it offers excellent stability, repeatability and resolution required for use in rivers and reservoir measurement. Housed within a 316L stainless steel housing, this submersible level transmitter is the ideal product for reliable and repeatable hydrostatic level measurement. Every device is temperature compensated and calibrated, supplied with a traceable serial number and calibration certificate. The electronics incorporate a microprocessor based amplifier, this means there are no adjusting pots and therefore the electronics are very stable.

Product details

Minimum level range
1mWG
Maximum level range
100mWG
Reference
Gauge, Sealed Gauge or Absolute
Output
millivolt/4-wire, 4-20mA/2-wire, 0-10V/3-wire, 0.5 to 4.5V/3-wire ratiometric
Supply Voltage
3-12V dc/millivolt, 9-32V dc/2-wire, 14-32V dc/3-wire, 5V dc/ratiometric
Accuracy
≤±0.1% FSO BFSL, ≤±0.06% optional
Sensor Type
Stainless Steel Silicon
Process Connection
Self flushing nose cone, G1/4" when removed
Electrical Connection
Vented cable and strain relief
IP Rating
IP68 Fully submersible
Cable sheath material
PVC, PUR, FEP, TPE
Diaphragm Material
stainless steel 1.4435 (316 L)
Process Connection Material
stainless steel 1.4404 (316L)
Temperature Range
-20 to +60°C non freezing
Optional Extra's
Measurement range, output and supply versions, cable type and accuracy
Product Downloads

+44 (0)1635 291 600

This email address is being protected from spambots. You need JavaScript enabled to view it.

 

An ISO 9001 Certified Company

SGS ISO 9001 UKAS 2014 TCL LR-1