LMK 306 17mm Submersible level transmitter for hydrostatic level measurement

373.jpg
155.jpg

The LMK 306 uses a ceramic pressure sensor of 15mm diameter to achieve the 17mm diameter body in 316Ti stainless steel.  Level ranges are from 6mWG up to 200mWG and cable options of PVC, PUR and FEP.  Standard output is 4 - 20mA / 2-wire and powered from 12 to 36V dc.

The LMK 306 has been designed specifically for liquid level measurement in small <1" diameter boreholes or survey tubes.  This small diameter liquid level transmitter is ideal for accurate measurement of level and uses a ceramic pressure sensor to measure the level hydrostatically when submersed in the liquid.  It has measurement ranges from 6mWG through to 200mWG which is calibrated to a 4-20mA 2-wire output.  As standard the product has lightning protection to protect against lightning when installed in rivers, reservoirs or boreholes.  There are also options for the cable sheath used such as PVC, PUR or FEP to enable full compatibility to the media being measured.

Product details

Minimum level range
6mWG
Maximum level range
200mWG
Reference
Gauge and Absolute
Output
4-20mA / 2-wire
Supply Voltage
12 - 30V dc
Sensor Type
Ceramic Piezo-resistive
Process Connection
Self Flushing nose cone, flush when removed
Electrical Connection
Vented cable and strain relief
IP Rating
IP68 Fully submersible
Cable sheath material
PVC, PUR or FEP Cable
Diaphragm Material
Ceramic Al2O3 96 %
Process Connection Material
stainless steel 1.4404 (316L)
Temperature Range
-10 to +70°C
Optional Extra's
Cable type, calibrated range
Product Downloads

+44 (0)1635 291 600

This email address is being protected from spambots. You need JavaScript enabled to view it.

 

An ISO 9001 Certified Company

SGS ISO 9001 UKAS 2014 TCL LR-1