XACT i Process pressure transmitter with flush diaphragm

Minimum pressure range: 350mbar

Maximum pressure range: 35 bar

Reference: Gauge or Absolute

Output: 4-20mA/2-wire, HART communication & Profibus PA optional

Supply Voltage: 10 -30V dc

Electrical Connection: M12 4-pin connector or IP67 Cable outlet

Process Connection: G1" cone, clamp, dairy pipe, Varivent, flange, DRD

Accuracy: <±0.05% FS BFSL

Temperature Range: -40 to +125°C (300°C with optionl cooling coil)

Optional Extra's: HART Communications, Profibus PA, ATEX Version, Integrated temperature cooling element

The XACT i Process pressure transmitter has been developed and won awards for the unique design and practicle use in process applications. Pressure ranges start from 350mbar and go up to 35 bar in either Gauge or Absolute. The pressure transmitter can also be down ranged up to 10 times via the digitally compentsated electronics. ATEX version & HART Communication is optional.

Our piezoresistive silicon sensor DSP 111 is the basis for our x|act i. The sensor is – together with digital compensation electronics – directly mounted into the pressure port, and is connected to the intelli gent display and operating module via a I2C-interface of the compensation electronics. With the help of this innovative housing concept, precise and long-term stable pressure transmitters with flush-welded diaphragm and low thermal error can be produced.

• None

• None

• None