< Back to Product List
< Back to Home Page

We have a wide range of thermocouple sensors and assemblies available based on the standard thermocvouple types such as type J, type k, type S, type T etc.  We manufacture to order as well as have a standard range of stocked products, this means there should be a thermocoupole product for every requirement.

PPL1-T - Insertion thermocouple temperature probe

The PPL1-T is a basic insertion probe that can be used in conjunction with a compression fitting or rubber bung.  The PPL1-T can be fitted with any type of thermocouple and manufactured in a range of sheath diameters and lengths and cable material types for different temeprature applications.

PPL2-T - Threaded Thermocouple temperature probe

The PPL2-T is a simple thermocouple assembly which can be supplied with a selection of threaded connections either directly into the media or via a thermowell.  Any type of thermocouple can be used in this aseembly and a variety of cable types are availabel also.

PPL3-T - Insertion Thermocouple with terminal housing

The PPL3-T is a simple insertion temperature probe but fitted with a aluminium terminal housing.  this enables fitting of either a ceramic terminal block or in head temperature transmitter.  All types of thermocouples can be used within this assembly.

PPL4-T - Threaded thermocouple assembly with terminal housing

The PPL4-T is the same principle and construction as the PPL3-T but has a thread fixed tot he sheath for ease of mounting to a thermowell of direct to the process.  The termional housing enables customers to fit their own cable and ease of connection the ceramic terminal block or in head temperature transmitter.

PPL5-T Extension thermocouple assembly with terminal housing

The PPL5-T is the same device as the PPL4 above but with a extension between the Threaded part and the terminal housing.  This is useful if the media temperature is high and there is a risk that the terminal housing will be exposed to high temperaturs also.  The extension enables the temperature to be reduced at the point of the housing.

PPL6-T - Tri-Clamp thermocouple probe with terminal housing

The PPL6-T is a thermocouple assembly in a stainless steel sheath and a terminal housing for the electrical connection.  The Process conenction has been designed to fit the conventional industry standard tri-clamp hygenic fittings and have various options of probe lentgh and diameter.

PPL7-T - RJT thermocouple probe with terminal housing

The PPL7-T is a thermocouple temperature probe with a RJT process connection and aluminimum terminal housing.  The device can be fitted with a variety of thermocouple types and the terminal housing can have either ceramic terminal block or an inhead temperature transmitter.

PPL10-T - Air temperature sensor

The PPL10-T has been designed for wall mounting and to measure the air temperature without interferance from wind, rain and other environmental factors owing to the shroud that is used around the sensor sheath.  Optional in head temperature transmitter can be fitted to provide a 4-20mA output.