SRP-73MV Small process indicator for millivolt inputs

The SRP-73MV is a small size process indicator which can accept signals from millivolt strain gauge and bridge output type sensors and sources.  It has a dual colour display in red and green so when an alarm setpoint is reached the colour of the display changes!  it has up to 2 relay outputs and powers the sensors from the onboard 24V dc supply.

Display: LED, two-coloured (red-green), 4 x 13 mm

Display Range: -999 - 9999 + decimal point

Power Supply: 19V - 50V DC, 16V - 35V AC, 85 - 260V AC/DC

Input Types: 0-60 mV, 0-75 mV, 0-100 mV, 0-150 mV

Output Types: 0, 1 or 2 relays

Signal Re-transmission: None

Sensor Power Supply: 24V DC +5%, -10% / max. 100 mA

Accuracy: ± 0,25% ± one digit in the entire operation range

Case dimensions: 72 x 36 x 97 mm

Communications Interface: RS-485, ModBus RTU

The SRP-73 meter is equipped with one voltage input 0-60 / 0-75 / 0-100 / 0-150 mV. The selection of input range is realised by software, and selected range can be changed at any time. The additional advantage is possibility of programming following modes: linear, root, square and user defined (max. 20 points). 1 or 2 relay outputs make it possible to control processes ON/OFF type. The additional 24VDC output is used to power the measuring transducers and the RS-485 enables data transmission in production process monitoring systems.

• None

• None

• None