< Back to Product List
< Back to Home Page

All sensors in this section have a Resistance Thermometer as their sensing elements. Varying degrees of accuracy are available.

PPL1-P Resistance Thermometer with Lead

The PPL1-P is a basic insertion probe that can be used in conjunction with a compression fitting or rubber bung. The PPL1-P can be fitted with any type of resistance thermometer and manufactured in a range of sheath diameters and lengths and cable material types for different temeprature applications.

PPL2-P Resistance Thermometer, Process Thread & Lead

The PPL2-P is a simple RTD assembly which can be supplied with a selection of threaded connections either directly into the media or via a thermowell. Any type of resistance thermometer can be used in this aseembly and a variety of cable types are availabel also.

PPL3-P Resistance Thermometer with Terminal Head

The PPL3-P is a simple insertion temperature probe but fitted with a aluminium terminal housing. this enables fitting of either a ceramic terminal block or in head temperature transmitter. All types of resistance thermometers can be used within this assembly.

PPL4-P Resistance Thermometer with Process Thread

The PPL4-P is the same principle and construction as the PPL3-P but has a thread fixed tot he sheath for ease of mounting to a thermowell of direct to the process. The termional housing enables customers to fit their own cable and ease of connection the ceramic terminal block or in head temperature transmitter.

PPL5-P Pt100 Sensor with Process Thread & Extension

The PPL5-P is the same device as the PPL4 above but with an extension between the Threaded part and the terminal housing. This is useful if the media temperature is high and there is a risk that the terminal housing will be exposed to high temperaturs also. The extension enables the temperature to be reduced at the point of the housing.

PPL6-P Pt100 Sensor with Tri-Clamp Process Connection

The PPL6-P is a resistance thermometer assembly in a stainless steel sheath and a terminal housing for the electrical connection. The process connection has been designed to fit the conventional industry standard tri-clamp hygenic fittings and have various options of probe lentgh and diameter.

PPL7-P Pt100 Sensor with RJT Process Connection

The PPL7-T is a resistance thermometer temperature probe with a RJT process connection and aluminimum terminal housing. The device can be fitted with a variety of RTD's and the terminal housing can have either ceramic terminal block or an in head temperature transmitter.

PPL8-P PT100 Sensor with pocket & spring loaded insert

The PPL8-P is a standard Resistance thermometer assembly but the sensor is incorporated into the housing and stem by a spring loaded insert which allows the sensor to be withdrawn extremely easily without breaking into the process line.  Effectively this is an incorporated thermowell pocket.

PPL9-P PT100 Indoor Air temperature sensor

The PPL9-P is a simple resistance thermometer air temeprature sensor within a convieniet wall mounting enclosure.

PPL10-P Pt100 Exterior Air Temperature Sensor

The PPL10-T has been designed for wall mounting and to measure the air temperature without interferance from wind, rain and other environmental factors owing to the shroud that is used around the sensor sheath. Optional in head temperature transmitter can be fitted to provide a 4-20mA output.