PPL5-T Extension thermocouple assembly with terminal housing

125.jpg

The PPL5-T is the same device as the PPL4 above but with a extension between the Threaded part and the terminal housing. This is useful if the media temperature is high and there is a risk that the terminal housing will be exposed to high temperaturs also. The extension enables the temperature to be reduced at the point of the housing.

Our PPL5 sensor has a fixed male process connection thread plus a lagging extension beneath a terminal head giving the user the ability to screw the sensor directly into a process or thermowell without the need for a compression fitting. The lagging extension allows the terminal head to be mounted away from the process in order to protect any electronics housed within it or to allow the head to sit above any insulation. We can manufacture the sensor stem to your own diameter and length requirements and we have plenty of options available for the sensor and terminal head.

Product details

Output
Thermocouple
Sensor Type
Type J, K or T thermocouple. Insulated or Grounded hot junction
Process Connection
1/4", 1/2", 3/4" and 1" BSP, BSPT and NPT
Electrical Connection
Terminal Housing
IP Rating
IP67
Temperature Range
-50 to +250°C, Higher temperatures on request
Optional Extra's
Customer specific sensor type, type of terminal housing, in-head temperature transmitter, Length of extension
Operating Temperature
-50 up to 250°C
Probe Diameter
3mm up to 15mm
Probe length
To customer requirements
Product Downloads

+44 (0)1635 291 600

This email address is being protected from spambots. You need JavaScript enabled to view it.

 

An ISO 9001 Certified Company

SGS ISO 9001 UKAS 2014 TCL LR-1