XMP ci Flush diaphragm process pressure transmitter

299.jpg
80.jpg

The XMP ci is the same intelligent, re-rangeable device as the XMP i but incorporates a capacitive ceramic pressure sensor, this offers higher over range proction and better thermal stability. The turndown is limited to 10 times but has a minimum pressure range of 60mbar and up to 20 bar. ATEX version and HART communication is optional.

The process pressure transmitter XMP ci measures the pressure of gases, steam and fluids. The special-developed capacitive ceramic sensor for this transmitter has a high overpres-sure capability and excellent media stability. Several process connections e.g. thread or flange are available. The transmitter is as a standard equipped with HART®-communication, the customer can choose between a two cham-ber aluminum die cast case or a stainless field housing.

Product details

Minimum pressure range
60 mbar
Maximum pressure range
20 bar
Vacuum Resistant
Yes
Reference
Gauge Only
Output
4-20mA/2-wire, HART communication, Profibus PA optional
Supply Voltage
12 - 28V dc
Accuracy
nominal pressure
Sensor Type
Ceramic Capacitive
Process Connection
Threads (inch, NPT), flange (DIN 2501, ANSI), DRD
Electrical Connection
Internal terminal clamps
IP Rating
IP67
Diaphragm Material
Ceramic Al2O3 99.9 %
Process Connection Material
Stainless steel 1.4404 (316L)
Display type
LC-display, visible range 32.5 x 22.5 mm; 5-digit 7-segment main display, digit height 8 mm, range of indication ±9999; 8-digit 14-segment additional display, digit height 5 mm; 52-segement bargraph; accuracy 0.1% ± 1 digit
Temperature Range
-40 to +125°C
Approvals
ATEX Approval Ex ia & Ex d
Product Downloads

+44 (0)1635 291 600

This email address is being protected from spambots. You need JavaScript enabled to view it.

 

An ISO 9001 Certified Company

SGS ISO 9001 UKAS 2014 TCL LR-1