» Pressure Sensor

We not only provide housed, compensated and conditioned pressure sensors but also supply the pressure sensing elements within the pressure tranducers and pressure transmitters.  This is particularly suited where space or a budget are limited or where the sensor technology needs to be an integrated part of a system.  We can provide sensors based on the following technologies: piezo-resistive, capacitive, thin film and inductance based and with materials such as ceramic, stainless steel and silicon.

ME501/505 - 18mm Ceramic Pressure Sensor

18mm diameter ceramic pressure sensor based on a piezo-resistive wheatstone bridge, 0.5 bar through to 600 Bar in gauge, sealed gauge or absolute reference.

ME506 - 15mm Ceramic Pressure Sensor

15mm diameter ceramic pressure sensor based on a piezo-resistive wheatstone bridge, 1 bar through to 20 Bar in gauge, sealed gauge or absolute reference.

ME651 - 18mm Monolithic Ceramic Pressure Sensor

18mm diameter monolith ceramic pressure sensor based on a piezo-resistive wheatstone bridge, 2 bar through to 400 Bar in gauge only reference.

ME662 - Ceramic pressure sensor, PCB mountable

18mm diameter monolith ceramic pressure sensor based on a piezo-resistive wheatstone bridge, 2 bar through to 400 Bar in gauge only reference.

ME705 - Ceramic Pressure Sensor, signal conditioning

18mm diameter monolith ceramic pressure sensor based on a piezo-resistive wheatstone bridge, 2 bar through to 400 Bar in gauge only reference.

DSK 701C Adjustable ceramic capacitive pressure sensor

The DSK 701C is a fully programmable ceramic pressure sensor using the capacitive measurement technology.  Pressure ranges from 60mbar through to 20 bar but have the ability to be down ranged via the RS-232 interface up to 10 times.  The output is 4-20mA or ratiometric 0.5 to 4.5V dc with several parameters configuarble.

DSP 410K 18mm Silicon Pressure Sensor

The DSP 410K is an 18mm diameter piezo-resistive pressure sensor where the silicon sensor is isolated by the oil filled stainless steel diaphragm.  Pressure ranges from 100mbar through to 7 bar gauge reference.  Vacuum Resistant.

DSP 411K 18mm Silicon Pressure Sensor

The DSP 411K is an 18mm diameter piezo-resistive pressure sensor where the silicon sensor is isolated by the oil filled stainless steel diaphragm.  Pressure ranges from 350mbar through to 70 bar gauge and absolute reference.

DSP 410Z Silicon Pressure Sensor with integrated electronics

The DSP 410Z is an 18mm stainless steel pressure sensor with silicon piezo-resisitive technology and also incorporates an electronics amplifier PCB to offer a 0.5 to 4.5V dc output from a 5V dc supply.  Pressure ranges from 100mbar through to 7 bar gauge.  Vacuum Resistant.

DSP 411Z Silicon Pressure Sensor with integrated electronics

The DSP 411Z is an 18mm stainless steel pressure sensor with silicon piezo-resisitive technology and incorporates a PCB on the back of the sensor to offer a 0.5 to 4.5V dc output from a 5V dc supply.  Pressure ranges from 350mbar through to 100 bar in gauge and absolute reference.