PPL5-T Extension thermocouple assembly with terminal housing

The PPL5-T is the same device as the PPL4 above but with a extension between the Threaded part and the terminal housing.  This is useful if the media temperature is high and there is a risk that the terminal housing will be exposed to high temperaturs also.  The extension enables the temperature to be reduced at the point of the housing.

Sensor Type: Type J, K or T thermocouple. Insulated or Grounded hot junction

Output: Thermocouple

Temperature Range: -50 to +250°C, Higher temperatures on request

Operating Temperature: -50 up to 250°C

Electrical Connection: Terminal Housing

Process Connection: 1/4", 1/2", 3/4" and 1" BSP, BSPT and NPT

Probe Diameter: 3mm up to 15mm

Probe length: To customer requirements

IP Rating: IP67

Optional Extra's: Customer specific sensor type, type of terminal housing, in-head temperature transmitter, Length of extension

Our PPL5 sensor has a fixed male process connection thread plus a lagging extension beneath a terminal head giving the user the ability to screw the sensor directly into a process or thermowell without the need for a compression fitting. The lagging extension allows the terminal head to be mounted away from the process in order to protect any electronics housed within it or to allow the head to sit above any insulation. We can manufacture the sensor stem to your own diameter and length requirements and we have plenty of options available for the sensor and terminal head.

• None

• None

• None