ME662 Low cost PCB Mountable ceramic pressure sensor

The ME662 monolithic ceramic pressure sensor is a piezo-resisitive Wheatstone bridge screen printed onto the body which is 18mm diameter.  The sensor has a wide pressure range in gauge reference only and has a good overall performance regarding non-linearity and hysteresis and temperature compensation.  Pressure ranges are from 2 bar through to 400 bar.

Minimum pressure range: 2 bar

Maximum pressure range: 400 Bar

Reference: Gauge

Output: mV/V (4-wire)

Supply Voltage: 2 - 30V dc

Electrical Connection: Solder Pads, Pins or Ribbon Cable

Accuracy: ±0.2% FS

Temperature Range: -40 to +135°C

Optional Extra's: Parylene Coating, Special Compensation, Electrical Connection

The ME662 18mm monolith Ceramic Pressure Sensors use piezoresistive wheatstone bridge based technology screen printed on to the ceramic pressure diaphragm. The measuring bridge is directly on one side of the ceramic body machined from a single piece of ceramic. The sensor comes in a PA housing that can be easily mounted onto a PCB and then used easily in OEM applications by means of the PCB specific housing. The use of ceramic ensures a high linearity through the complete range and reduces the effect of Hysteresis to a minimum. 

• SRP-73MV - Small profile digital process indicator

• SRP-94MV - Standard digital process indicator

 

• None

• None