February 2005 - Product Highlights

IMP02 Detachable Submersible Level Transmitter

This hydrostatic submersible has a cable assembly that can be detached from the transmitter to enable easy removal on site.  This reduces time and money when re-calibrating or servicing the product.  Using the latest in programmable ASIC based electronics, accuracy can be selected from 0.25% through to an ex-ceptional 0.05%.  An integrated 3 wire temperature sensor is optional to give both the level measurement and temperature measurement of the media.

Enquire about this product via e-mail? Click here

dTrans T03 Small '27mm' In-head transmitter

These temperature transmitters are used to measure the temperature through Pt100 resistance thermometers in 2-/3-wire circuit connections.  The 4 — 20 mA or 0 — 10 V output signal is linear with temperature.  The continuous analog signal path enables an extremely fast reaction time of the output to a change in temperature resulting in a low-noise output signal that is insensitive to interference.

Enquire about this product via e-mail? Click here

Process Seals & Flush Diaphragm Pressure Transmitters

The DMP range of pressure products accommodate flush diaphragms and seal fittings such as inch threads, Varivent, Clamp fittings, Dairy pipe connections and also the option on all fittings to have an integral cooling element taking the process temperature to 300°C.  All stainless steel construction and fully compensated to high accuracy makes this an ideal process solution at very good prices.

Enquire about this product via e-mail? Click here