DMK 331 Aggressive media pressure transmitter

The DMK 331 is for pressure measurement with aggressive media owing to it's ceramic pressure sensor and choice of stainess steel, PVC or PVDF process conenction and housing material.  Pressure ranges from 400mbar through to 600 bar and outputs including 4-20mA or 0-10V, a selection of electrical connections are also available.

Minimum pressure range: 0.4 bar

Maximum pressure range: 600 Bar

Reference: Gauge, Sealed Gauge and Absolute

Output: 4-20mA and Voltage

Supply Voltage: 10 - 32V dc (14 - 32V dc for voltage)

Electrical Connection: Plug & Socket, Cable, M12 x 1 connector, Amphenol

Process Connection: G1/4" male & female, G1/2" male, NPT's

Accuracy: <±0.25% FS BFSL

Temperature Range: -25 to +135°C

Optional Extra's: Process Connection, Electrical Connection, output, housing material, O ring type, ATEX & SIL2 approval

The DMK 331 pressure transmitter has a ceramic pressure sensor installed which is idea for use with aggressive media, to assist the corrosion resistance there is a choice of stainless steel, PVC or PVDF as the housing material.  We can also use a chemraz O ring seal for the most aggressive chemical applications.  Pressure ranges from as low as 400mbar and up to 600 bar ensure this product is ideal for the majority of applications where aggressive media is being measured and cost is not high like conventional methods of chemical seals and bariiers.  Installation of this pressure transmitter is also simplified by a choice of standard process connections such as 1/2" with an open port for slightly viscous or media with particles or a sub flush for heavier viscosity.  It has options of electrical connections such as simple plug & socket through to an IP67 rated field housing with terminals to suit any application and environment.

• None

• None

• None