Piezo-resistive ceramic pressure sensorRSS

Piezo-resistive ceramic pressure sensor

Low cost Ceramic pressure sensors with either a monolithic or flush face deisgn, based on the piezo-resistive principle.  A variety of outputs are available including mV/V, 0.5 to 4.5V dc ratiometric, 4-20mA and 0 - 10V with onboard signal conditioning.

Categories

ME501/505 18mm Ceramic Pressure Sensor

This ceramic pressure sensor is based on a standard piezo-resisitive Wheatstone bridge screen printed onto a diaphragm which is then hermetically sealed to a body and offers a wide pressure range, gauge, absolute or sealed ...

ME506 15mm Ceramic pressure sensor

The ME506 15mm Ceramic Pressure Sensors use piezoresistive wheatstone bridge based technology screen printed on to the ceramic pressure diaphragm. The measuring bridge is directly on one side of the ceramic diaphragm by mea ...

ME651 Monolith Ceramic Pressure Sensor

The ME651 18mm monolith Ceramic Pressure Sensors use piezoresistive wheatstone bridge based technology screen printed on to the ceramic pressure diaphragm. The measuring bridge is directly on one side of the ceramic diaphra ...

ME662 Low cost PCB Mountable ceramic pressure sensor

The ME662 18mm monolith Ceramic Pressure Sensors use piezoresistive wheatstone bridge based technology screen printed on to the ceramic pressure diaphragm. The measuring bridge is directly on one side of the ...

ME662-NTC Ceramic pressure sensor with temperature sensor

The ME662-NTC is based on the popular ME651 monolithic ceramic pressure sensor but with an additional conenction to the integrated NTC temperature sensor which is screen printed onto the diaphragm of the sensor.  This ...

ME705 Monolithic Ceramic pressure sensors with signal conditioning

The ME705 18mm Ceramic Pressure Sensors uses piezoresistive wheatstone bridge based technology screen printed on to the ceramic pressure diaphragm. The measuring bridge is directly on one side of the ceramic diaphragm by me ...

ME707 Flush Membrane Ceramic pressure sensors with signal conditioning

The ME707 18mm Ceramic Pressure Sensors uses piezoresistive wheatstone bridge based technology screen printed on to the ceramic pressure diaphragm. The measuring bridge is directly on one side of the ceramic diaphragm by me ...

ME751 Monolith pressure sensor, ASIC signal conditioning, 4-20mA output

The pressure sensors of the ME75X series are piezoresistive ceramic sensors with three different output signal options: Ratiometric 0.5-4.5V, non ratiometric 0-10Volt or current loop 4-20mA. The sensors are based on improve ...

ME752 Monolith pressure sensor, ASIC signal conditioning, 0 - 10V dc output

The pressure sensors of the ME75X series are piezoresistive ceramic sensors with three different output signal options: Ratiometric 0.5-4.5V, non ratiometric 0-10Volt or current loop 4-20mA. The sensors are based on improve ...

MEM0780 - Flush ceramic sensor, integrated signal conditioning

Metallux SA, worldwide known as a leading company in manufacturing "high-quality" ceramic sensors, presents a new Type of pressure sensor with a direct top placed signal conditioning. The new family ME780 is an improvement ...

ME772 Flush ceramic pressure sensor, 0-10V output

The pressure sensors of the serie ME77X are piezoresistive ceramic sensors with three different output signal options: Ratiometric 0.5-4.5V, non ratiometric 0-10Volt or current loop 4-20mA. The sensors are based on the two ...

ME771 Flush diaphragm, 4-20mA signal conditioning

The pressure sensors of the serie ME77X are piezoresistive ceramic sensors with three different output signal options: Ratiometric 0.5-4.5V, non ratiometric 0-10Volt or current loop 4-20mA. The sensors are based on the two ...

+44 (0)1635 291 600

This email address is being protected from spambots. You need JavaScript enabled to view it.

 

An ISO 9001 Accredited Company

SGS ISO 9001 UKAS 2014 TCL LR-1